Raising A Few Brows

The teak brows were probably the least attractive pieces of wood on the boat and a pain to keep up. All of the screws that secured them to the sides of the cabin have been a source of leaks that we knew we needed to deal with soon. We did some caulking early on to stop the water intrusion, but caulking is just the proverbial band-aid, and more drastic action was necessary to resolve it once and for all. Just as with the flybridge, removal has been my choice since day one and the time has come to tackle the project and check it off the list.

The Flybridge Makeover That Never Ends

I know that after this post I will get some feedback, but not all positive. I have committed a major sin in the trawler society, but I am not sorry and offer no apologies. The interior of the flybridge is finished, the uppermost of the outside now has a fresh coat of paint and it all looks great. Now it's time to finish up and get the last two steps of this ongoing project finished so I can move on to other more pressing parts of the to-do list. The inside of the flybridge is now fiberglassed to the deck and there will be no removal possible, so it's only logical that the outside gets the same treatment.

30-Year-Old Boat Plumbing Replacement

Replacing the 30-year-old copper plumbing in our fresh water system was on my Things-to-do-when-there-is nothing-else-and-I-have-lots-of-time list and I expected to get to it some time in the years to come. But as with all things boats, that was not to be. Our hot water began flowing ever so slowly out of all of the taps for no apparent reason. I disconnected some of the lines and attached a hose from the dock in an attempt to blow it out. I also took all of the faucets apart in case the blockage was there, but ALL of them? None of this helped so now the project shoots right to the top of my Need-to-do-it-now list.

Moving The Starting Battery

Our starting battery sits in a nice fiberglass box that is mounted in the front of the engine. The distance to our house bank is about a foot and makes for short cables and easy access to use jumper cables in case the starting battery goes dead. But this is the space we plan to use to move the house bank so that the genset can be installed. It also makes for a long cable run to the starter, requiring large wires. So it is time to make a change in preparation for moving the house bank. The plan is to move it right next to the engine starter and eliminate those long and large cables to the starter.

Anchoring Along the Intracoastal – Norfolk to the Georgia/Florida Border

By Susan Landry

(Chartlets by Susan Landry, not to be used for navigation.)

Our cruising posts in the past have always included our favorite anchoring spots. As the snowbirds head south this fall, some for a repeat performance, some for the first time, they’ll be looking for secure anchorages for the night in the ICW. We try to average about 50 miles per day and what follows are our suggestions without marina stops.

What Do You Do Once You're In The Bahamas?

Is It Really Better In The Bahamas??

This is a follow to our post, What Cruisers Want To Know About The Bahamas.

You've done all of your homework. You've picked the perfect weather window. You were in awe as the dark blue of the Gulf Stream gave way to the crystal clear, but shallow waters of the Bahamas Banks. The feel of accomplishment just can't be describe. You have arrived, so now what? The answer is almost as endless as the Island chain itself.

Flybridge Makeover Part Two

With the "interior" makeover of the flybridge complete, the "exterior" was next on our list. Since the exterior of the boat has been painted in the past and we knew it was done in AwlGrip, the maintenance coat was a lot less labor intensive. First, all of the hardware and fittings were removed, including the vinyl lettering for her name. All edges had a double row of delicate tape to keep paint off of where it does not belong. Several screw holes that had mounted hardware that was no longer in use had to be filled and repaired. A good sanding and a single coat of 545 white primer and everything was ready for paint.

An Exhausting Project

The Christmas and New Years holiday season doesn't mean the work on the boat will slow down or stop. If we are to stay on schedule, we need to push forward with all of our projects, even the smaller ones. Those smaller ones keep getting pushed down the list as more important tasks present themselves and some get moved to the top for a variety of reasons. But the list doesn't look any shorter even with all of the done items scratched off. One small project I have been promising to Susan for a long time is finally done.

Holding Tank Monitor And Major Service On Our Ford Lehman

We posted our holding tank installation several months back and one of the unfinished parts of that project was to install a tank monitor. We did a lot of research on the different types and manufacturers and finally decided on the Solo Tank Monitor made by New Providence Marine/Ferriello Sales LLC. The decision was based on lots of positive feedback from current owners and a recommendation from Miss Peggy Hall, known throughout the boat industry as the "Head Mistress." Peggy has a couple of excellent books on marine sanitation. The installation could not have been more straightforward or easier.

Trawler Flybridge Makeover

A major project that had been on my to-do list for a very long time was the renovation of the flybridge. I knew this was going to be a lot of work, and other more pressing projects had kept this on the back burner. But at some point, it really needed to be done and recently, it reached that point. The "You Have to Do It Now" list was blank for the time being, and I had found the extra time away from the work stuff to get it done. But it was not one of my more pleasant projects.

Plotting Your Course

In September of 1987, I sailed my 30-foot Hughes Columbia sailboat south to Little River, South Carolina. After a few days of waiting weather, I exited the Little River Inlet and pointed the bow towards Bermuda, some 1,000 miles away. To find that small speck in the middle of the Atlantic, I had the most up-to-date navigational instruments of the time. They consisted of a compass, VHF radio, a sextant with complete tables, paper charts and a radio direction finder. Seven and a half days later, I tuned the RDF to the radio signal for St. Georges Harbor and my feelings of accomplishment were beyond explanation.

Adjusting Our Ford Lehman Tachometers In Four Easy Steps

The tachometers for our Ford Lehman 120 have been a question mark since we bought the boat. We have had no way to know how accurate they are, and our cruising RPMs help to determine how much fuel we burn per hour. With the price of fuel today, this is an important piece of information and we would like to be as accurate as possible. Of course, calculating the number of hours run and the fuel added to the tank will give us an average, but we want to be more precise. Running the engine at our average cruising RPMs of about 1750 will mean a fuel burn of about 2.2 gallons per hour (GPH). Running at 1950, the fuel burn jumps up to 3.1 GPH and at 2000 RPMs, it is 3.4 GPH. Having the correct readings on the tachs can save us some considerable cash considering our cruises are usually thousands of miles.

The Big Boat Cover-up

One of my pet peeves with businesses in the marine industry is not showing up for appointments when we need an estimate. I can't count how many times we have called someone locally and said we were ready to spend some money, but needed to have them come out and give us an estimate. The response is always, "no problem, we will be there on XYZ day." That day comes and you wait...and wait...and wait. Finally, you give up when they are a no-show. We absolutely will not call someone back and beg them to take our money. Besides, if they won't show up for the estimate, what would happen if we gave them a job to do? The biggest offenders, in our opinion, are the canvas shops. I mean, if your not coming, call and say so, and if your too busy to take another job, tell me your too busy! But I am amazed how so many cry about how terrible business is and blame it on the economy, cheap boaters and all kinds of other influences.

Our New Outboard Lift and Back Saver

During our cruise along the south coast of Cuba several years ago, I did a really dumb thing. We were Med-moored to the dock at Santiago, next to our friend's Vagabond 47 and there was a bit of swell running in the harbor. We both decided to set out an anchor from our bow to keep us from banging together and used our dinghy to do just that. I sat in the dinghy with our CQR 45 and about 50 feet of 3/8 BBB chain in my lap ready to deploy the anchor, and that is when it happened.

Is It Hard To Install A Single Side Band Radio?

First, a complete disclosure. I have installed a dozen or more SSB radios as a service technician over the years. But my first two installations were on our own boat and I started with no previous knowledge and only the manufacturers manual. To make matters worse, we had no internet to do any research on and most installers would have us believe that there was some kind of magic and mystery to installing an HF radio. We quickly found out that was not the case, and installing one of these radios was no more difficult than installing any other piece of equipment. Eighteen years later, we are installing the most current Icom offering, the 802, on Beach House in preparation for future cruising. And once again, it was not all that difficult.

Ongoing Boat Projects

If we seem to have fallen down on our projects, it only appears that way. Since we arrived in Fort Myers Beach, the work on the boat has been constant. That doesn't mean we have not had time to walk on the beach, go for a swim in the Gulf, or sample the local cuisine. We have done all of that between working on the boat. Getting her cruise ready for the next big trip is always our priority. But every once in a while, we need to have a little fun, too. Some of the projects began while we were in Maryland, and some have been waiting for us to find a good deal on the right equipment. I suppose the day will actually come when we can say, "We are ready."

Ford Lehman Diesel Oil And Filter Change

After a 1,200-mile-plus cruise, engine maintenance is not a to do, it is rather a must do. We did take the opportunity to change oil and filters at the halfway mark, but a thorough change of all filters, as well as an oil change, was high on our list. So I thought I would share the experience with you and give you some insight on how we approach this sometimes messy chore.

Life's A Beach

We have been here for a few weeks now and are getting settled in as well as learning the lay of the land. I don't know how we manage it, but we often seem to settle in at a popular tourist location with all of the issues and interesting experiences that apply. Fort Myers Beach, Florida is no exception. But there is a lot to be said for this location and things are moving in the right direction for us.

Cruising the South Coast of Cuba – East to West

This was originally posted on our Sea Trek site. This was originally published in Soundings Magazine, and many of our readers ask that we republish it. So here it is and we hope you enjoy reading it as much as we enjoyed making the trip. Revisiting Cuba is high on our cruising plans.

We weighed anchor and got underway from Punta Manzanillo in the Dominican Republic at 6:30 a.m. on a Sunday morning. It was Easter Sunday and we knew that the entire island of Hispaniola would be celebrating today. We would sort of be celebrating ourselves, but in a different way and for a different reason. Today was the beginning of a cruising adventure that began as an idea five years prior and was just now before us.

Leaving the Florida Keys, making a quick trip through the Bahamas, Turks and Caicos and now the DR, we were as ready as we were going to be. We had provisioned and prepared the boat while spending a wonderful time in Luperon. A day sail to Manzanillo and a good night’s sleep found us both excited and anxious. We had heard mixed reports about visiting Cuba. Everything from how terrible it was to reports that it is one of the most wonderful cruising grounds left in the Atlantic. Soon we would know.

It Always Ends All Too Soon

The waterway from Moore Haven to Fort Myers is wide and deep with little in the way of obstacles or challenges. One recent comment on this trip was whether or not we felt bored or lacked any excitement traveling along the many canals that interconnect the rivers, lakes and sounds that we have traveled to get to our final destination. My response is, absolutely not. Every canal and waterway has its own personality and each is to be enjoyed on its own merits. If I had one word to describe our transit of the Okeechobee Waterway, it would be, spectacular.